Honda devises system to realize optimum torque distribution

Honda devises system to realize optimum torque distribution

TOKYO, Japan - Photo shows the core portion of a new system developed by Honda Motor Co. to determine the optimum front-rear and left-right torque distribution for outstanding vehicle stability by monitoring driver input and driving conditions. Honda said April 1 the Super Handling All-Wheel-Drive (SH-AWD) system combines front-rear torque distribution control with independently regulated torque distribution to the left and right rear wheels to freely distribute the optimum amount of torque to all four wheels in accordance with driving conditions. (Kyodo)

  • Product Code
  • ILEA000024279
  • Registered date
  • 2004/4/01 00:00:00
  • Credit
  • Kyodo / Kyodo News Images
  • Media source
  • Media size
  • 1653 × 1088 pixel
  • Resolution
  • 72 dpi
  • Deployment size
  • 237.44(KB)*
  • Special instruction

*File size when opened in Photoshop, etc.

Similar Images & Videos
    Demonstration experiment of walking guidance by a cane-type robot with wheels at Osaka City University

    Demonstration experiment of walking guidance by a cane-type robot with wheels at Osaka City University

    When the user walks holding the staff part, the robot automatically steers the wheels and guides the user to the destination. A feature of the robot is that it does not have an autonomous movement function, so that users can feel as if they are walking by themselves. This time, a function has been added that allows users to set their destinations by holding up their cards. However, as it was found to be difficult to use during the verification experiment, Mr. Imazu intends to improve this function, saying, "We would like to consider other methods, including voice recognition technology. A crowdfunding campaign is currently underway until the evening of the 26th in order to put the system into practical use as soon as possible. The target amount is set at 2 million yen. The funds raised will be used to develop charging facilities and waterproof exteriors. On December 12, 2019, at the Sugimoto Campus of Osaka City University in Sumiyoshi Ward, Osaka City, Credit: Nikkan Kogyo Shimbun / Kyodo News Images
      The second factory of Okada Shell Manufacturing introducing IT production control system.

      The second factory of Okada Shell Manufacturing introducing IT production control system.

      Okada Shell Manufacturing (Awaji City, Hyogo Prefecture) will introducean IT production management system to its No. 2 plant by December 2020. The investment will amount to about 20 million yen. The plant is the main production base near the main plant. The production plan will be reflected directly from the office to the production facilities in the plant, and the progress will be monitored in real time. Okada Shell Manufacturing Co., Ltd. is engaged in the production of cores, which are sand molds used to create cavities inside castings. Conventional paper-based production records have been prone to errors, but the company will automatically accumulate production data from its facilities and use the data to extract production conditions that realize high quality and to train young workers. In addition to the use of simulation equipment to analyze the core manufacturing method, the defect rate will be reduced from 5% to 2%. Credit: Nikkan Kogyo Shimbun / Kyodo News Images
        Automated driving demonstration operation in Oita City (right)

        Automated driving demonstration operation in Oita City (right)

        The city of Oita will operate an automated low-speed electric small bus for citizens in the center of the city until March 20 (photo). The buses will be operated automatically, equivalent to "Level 2," with a driver on board and an automatic driving system to assist with steering correction and speed adjustment. The buses will be in operation from 10:00 to 16:15. Rides will be accepted at the drop-off and pick-up points on a first-come, first-served basis. Since the previous experiment, a new system for automatically changing lanes and other features have been added. The city is also planning to operate an automated vehicle in the city center during the Rugby World Cup in October. (= September 13, 2019, Oita city center, credit: Nikkan Kogyo Shimbun / Kyodo News Images)
          Toho Gas' "Air Ratio Visualization System" for Monitoring Combustion Conditions

          Toho Gas' "Air Ratio Visualization System" for Monitoring Combustion Conditions

          Toho Gas Co., Ltd. has developed the "Air Ratio Visualization System," a system to monitor the combustion condition of gas burners for industrial furnaces used in heat treatment and aluminum melting by measuring the difference between the theoretical required amount of air and the amount of air during combustion. The system can be done at low cost, employing general-purpose products such as oxygen sensors for automobile exhaust gas and EMS controllers for information transmission equipment. The system will be used to strengthen services as a solution for energy saving and efficient maintenance. The system has been narrowed down to the oxygen concentration measurement function, making it easier to use general-purpose products. However, if an automotive exhaust gas sensor is used as is, it will lose its output after about six months, so we developed our own control logic to extend its life. (Photo taken on July 12, 2019, location unknown, credit: Nikkan Kogyo Shimbun / Kyodo News Images)
            Picking solution robot that Nippon Express aims to put to practical use

            Picking solution robot that Nippon Express aims to put to practical use

            Nippon Express will commercialize a collaborative picking solutionfor logistics warehouses by the end of fiscal 2019, using robots (photo) from Rapyuta Robotics (Chuo-ku, Tokyo; Rapyuta Robotics). The company conducted a demonstration at its own distribution warehouse in June. Another demonstration experiment will be conducted in September with the aim of putting the system into practical use. The Laputa robot is an autonomous mobile robot (AMR) that assists people in their picking work. The core of the technology is the control and management of multiple robots in accordance with the progress of the work. The robots move along the aisles of the product shelves, show the workers the items to be removed from the shelves, and then transport the removed items. This reduces the range of movement for the worker, leading to reduced workload and time savings. (= July 12, 2019, photo location unknown, credit: Nikkan Kogyo Shimbun / Kyodo News Images)
              Hino Motors' new safety system

              Hino Motors' new safety system

              Photo taken in Hamura, Tokyo, on June 14, 2019, shows a camera installed on Hino Motors Ltd.'s S'elega tourist bus that can detect abnormality in a driver's behavior, such as the result of a seizure, and allow the vehicle to automatically stop. (Kyodo) ==Kyodo
                Testing a motor that does not use a permanent magnet.

                Testing a motor that does not use a permanent magnet.

                Rizik and Taiyo Denki Engineering (Saiwai-ku, Kawasaki City) will jointly develop an electric two-wheeler equipped with a motor that does not use permanent magnets, with the aim of developing a prototype in July. Based on the results of the experiment, the company will make improvements and appeal the effectiveness of motors that do not use permanent magnets to the two-wheeled vehicle market. The system, which is based on Rizik's technology, regenerates the power generation energy stored in the coil to the power source when the current exceeds the set value in the power generation operation, and returns to the power generation operation when the coil current drops due to the regeneration operation to repeatedly maintain the power generation and regeneration operations. The company will supply the control unit, and Taiyo Denki Engineering will incorporate it into the motor and install it in the motorcycle. (Photo taken on May 27, 2019, location unknown, credit: Nikkan Kogyo Shimbun / Kyodo News Images)
                  Nissan's new concept electric vehicle

                  Nissan's new concept electric vehicle

                  TOKYO, Japan - Photo shows the Nissan Pivo 3, a new concept electric vehicle unveiled by Nissan Motor Co. on Nov. 8, 2011, before its debut at the 2011 Tokyo Motor Show. When a driver leaves the vehicle at a designated place, its automatic valet parking system enables the vehicle to find a parking space in a specially equipped smart parking lot, the automaker said. (Kyodo)
                    Nissan's new concept electric vehicle

                    Nissan's new concept electric vehicle

                    TOKYO, Japan - Photo shows the Nissan Pivo 3, a new concept electric vehicle unveiled by Nissan Motor Co. on Nov. 8, 2011, before its debut at the 2011 Tokyo Motor Show. When a driver leaves the vehicle at a designated place, its automatic valet parking system enables the vehicle to find a parking space in a specially equipped smart parking lot, the automaker said.
                      Mazda gets OK to road-test hydrogen-powered vehicle

                      Mazda gets OK to road-test hydrogen-powered vehicle

                      HIROSHIMA, Japan - An official of Mazda Motor Corp. sits beside a hydrogen-fueled, rotary-engine version of Mazda RX-8 sports car in Hiroshima on Oct. 27. The company said it has received government permission to road-test the car that features a dual-fuel system that allows the driver to select hydrogen or gasoline with the flick of a switch. (Kyodo)