A robotic hand developed by OMRON and the University of Tokyo that repeatedly performs precise insertion

A robotic hand developed by OMRON and the University of Tokyo that repeatedly performs precise insertion

Professor Masatoshi Ishikawa of the University of Tokyo and Omron have developed a robot hand that can perform precision work by groping at a speed of 1,000 times per second. When the ring hits the end of the cylinder and the angle shifts, the robot adjusts its three fingers to restore the shift. This is a high-speed reproduction of the way a human being searches for the right angle to fit a ring using the senses of his or her fingertips. In the past, even with the use of force sensors, it took time to process, and insertion and removal took 1-2 seconds. In the automation of precision assembly, it is difficult to keep the positional accuracy within 10 micrometers, including robots and jigs. If this can be handled by hand or control, the range of precision work will expand. Photo taken on November 27, 2019, credit: Nikkan Kogyo Shimbun / Kyodo News Images

  • Product Code
  • ILEA000688023
  • Registered date
  • 2019/11/27 00:00:00
  • Credit
  • THE NIKKAN KOGYO SHIMBUN / Kyodo News Images
  • Media source
  • THE NIKKAN KOGYO SHIMBUN
  • Media size
  • 1944 × 2592 pixel
  • Resolution
  • 350 dpi
  • Deployment size
  • 2.78(MB)*
  • Special instruction
  • **The text may be generated by an automatic translation system**

*File size when opened in Photoshop, etc.

Similar Images & Videos
    Hokuriku Electric Power's "Assist Arm" robot for power distribution work

    Hokuriku Electric Power's "Assist Arm" robot for power distribution work

    Hokuriku Electric Power Company has completed the development of the "Assist Arm" (photo), a robot for power distribution work, and has begun deploying it. The robot will assist in the construction work, which used to be done by two people in a high-altitude work truck, enabling the work to be done by one person. This is the first time such a robot has been used in Japan. The company plans to adopt 10 more robots, including those of group companies, by the end of fiscal year 2019. The robots will be used for the most frequent part of the power distribution work, the wire separator work. In the past, high-voltage wires were cut and the cut wires were connected to each other with a temporary equipment called a wire separator by lifting a stick-shaped tool weighing about 10 kilograms. The robot will be able to cut wires and grab objects with an arm that can move in six axes with a single control grip, saving labor. Photo taken on November 20, 2019, credit: Nikkan Kogyo Shimbun / Kyodo News Images
      Drainage ditch inspection robot for muddy water

      Drainage ditch inspection robot for muddy water

      Sanritsu Automation (Machida City, Tokyo), Aichi Institute of Technology, Tokyo Metropolitan Industrial Technology Research Institute, and others have developed an inspection robot that can operate in water and mud. Any distortions or deformations, such as pipes collapsing vertically, will be detected and reflected in the maintenance plan. The aircraft is 39 cm wide, 72 cm long, and 40 cm high, and the angle sensor on the aircraft can measure the inclination of water pipes in 1 degree increments. The angle of the concrete structure of the waterway and the angle of the joints will be measured to check the drainage performance. Drainage ditches of less than 60 cm in width were difficult for humans to enter, and it was necessary to check the amount of oxygen and whether gas was stagnant. After confirming its running and survey performance, the company will proceed with commercialization. (= November 14, 2019, photo credit: Nikkan Kogyo Shimbun / Kyodo News Images)
        Picking solution robot that Nippon Express aims to put to practical use

        Picking solution robot that Nippon Express aims to put to practical use

        Nippon Express will commercialize a collaborative picking solutionfor logistics warehouses by the end of fiscal 2019, using robots (photo) from Rapyuta Robotics (Chuo-ku, Tokyo; Rapyuta Robotics). The company conducted a demonstration at its own distribution warehouse in June. Another demonstration experiment will be conducted in September with the aim of putting the system into practical use. The Laputa robot is an autonomous mobile robot (AMR) that assists people in their picking work. The core of the technology is the control and management of multiple robots in accordance with the progress of the work. The robots move along the aisles of the product shelves, show the workers the items to be removed from the shelves, and then transport the removed items. This reduces the range of movement for the worker, leading to reduced workload and time savings. (= July 12, 2019, photo location unknown, credit: Nikkan Kogyo Shimbun / Kyodo News Images)